Login | Register
My pages Projects Community openCollabNet

Discussions > users > Re: Problems with loading a build script

antelope
Discussion topic

Back to topic list

Re: Problems with loading a build script

Author Dale Anson <danson at germane-software dot com>
Full name Dale Anson <danson at germane-software dot com>
Date 2004-04-12 13:31:53 PDT
Message Hi Justin,

I looked at the loading code, and realized I'd shut off most of the
messages. I put them back in and reworked them a bit. I posted version
3.1.3 which has the better messages. It should give you enough to find
the problem pretty quickly.

Dale


Justin Casp wrote:

> Dale,
> I got 3.1.2 this morning. I loaded one of my project build scripts just
> fine, and everything seems to work great. Attempting to load the other
> project's build script gives me the same behavior that I wrote about
> last week, namely, nothing happens. I guess there is a parse error
> somewhere, but Antelope doesn't seem to report it anywhere. What is the
> easiest way for me to enable debugging when parsing buildfiles? FWIW,
> this same build script choked Antfarm when I was using jEdit 4.1.
>
> Justin
>
> Dale Anson wrote:
>
>> I posted Antelope 3.1.2 this evening. It includes the fix for this
>> bug, plus a few minor enhancements.
>>
>> Dale
>>
>>
>> Dale Anson wrote:
>>
>>> Yes, since your earlier message, I've located the bug. I'll let you
>>> know when it's fixed most likely I'll get it done over the weekend.
>>>
>>> Dale
>>>
>>>
>>> Justin Casp wrote:
>>>
>>>> The NPE was pretty easy to fix, but the point of the original email
>>>> was that once I got that fixed, Antelope initializes fine but fails
>>>> to do anything at all when I try to load a build file. Right now,
>>>> if I start the plugin and attempt to do File->Open and choose my ant
>>>> build file, Antelope does nothing. No error messages in either the
>>>> terminal I launched jEdit from or the Console plugin's Antelope
>>>> pane. It gives no indication that it got my command at all. Sorry
>>>> if I wasn't clear in my original message. Any ideas what might be
>>>> going wrong here?
>>>> Thanks again
>>>>
>>>> Justin
>>>>
>>>> Dale Anson wrote:
>>>>
>>>>> I think you must have downloaded AntelopePlugin_3.1.1.zip, which
>>>>> contains Antelope.jar The naming for the plugin is the standard for
>>>>> jEdit. The jEdit developers have standardized on just the name of
>>>>> the plugin without the "Plugin" word or version numbers attached,
>>>>> so Antelope.jar fits the standard. Anyway, I'm glad that it worked
>>>>> out for you. I think I need to look a little further into the null
>>>>> pointer exception.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Dale
>>>>>
>>>>>
>>>>> Justin Casp wrote:
>>>>>
>>>>>> Hi Dale,
>>>>>> I'm using 3.1.1, I grabbed it from antelope.tigris.org this
>>>>>> morning. I'm using ant 1.6.1 as well.
>>>>>>
>>>>>> The NPE went away when I built from source 3.1.1. The 3.1.1
>>>>>> binary had the NPE (wierd). The binary 3.1.1 was named
>>>>>> AntelopePlugin.jar, while the build script generated an
>>>>>> Antelope.jar only, not sure if the jar name has anything to do
>>>>>> with it.
>>>>>>
>>>>>> Thanks for your help
>>>>>> Justin
>>>>>>
>>>>>> Dale Anson wrote:
>>>>>>
>>>>>>> Hi Justin,
>>>>>>>
>>>>>>> Which version of Antelope do you have? There was a problem with
>>>>>>> the 3.1.0 version that caused a NPE on a new install that was
>>>>>>> (supposedly) fixed in the 3.1.1 release. I've also received a
>>>>>>> couple of reports recently that backward compatibility with Ant
>>>>>>> 1.5.x is broke. Ant 1.6.x works well.
>>>>>>>
>>>>>>> Dale
>>>>>>>
>>>>>>>
>>>>>>> Justin Casp wrote:
>>>>>>>
>>>>>​>>> Hi,
>>>>>​>>> I just came across Antelope when upgrading to jEdit 4.2pre11. I
>>>>>​>>> got the plugin binary from the tigris.org site, but that version
>>>>>​>>> caused a NullPointerException when I tried to launch the plugin
>>>>>​>>> from within jEdit. So I downloaded the source, added a few
>>>>>​>>> debugging statements, and rebuilt/reinstalled it, and it
>>>>>​>>> launched. However, now when I try to open a build file,
>>>>>​>>> Antelope does nothing. No error messages or anything that I can
>>>>>​>>> see. The only button that is enabled is what looks to be a
>>>>>​>>> Reload button, as well as the "Show Attributes" checkbox.
>>>>>​>>>
>>>>>​>>> I'd love to get this working, but since I have no indication of
>>>>>​>>> what is going wrong due to the lack of output when opening a
>>>>>​>>> file, I'm not sure where to look next. Any guidance is much
>>>>>​>>> appreciated.
>>>>>​>>>
>>>>>​>>> Thanks in advance,
>>>>>​>>> Justin
>>>>>​>>>
>>>>>​>>> --------------------​--------------------​--------------------​---------
>>>>>​>>>
>>>>>​>>> To unsubscribe, e-mail: users-unsubscribe@an​telope.tigris.org
>>>>>​>>> For additional commands, e-mail: users-help at antelope dot tigris dot org
>>>>>​>>>
>>>>>>>
>>>>>>> --------------------​--------------------​--------------------​---------
>>>>>>>
>>>>>>> To unsubscribe, e-mail: users-unsubscribe@an​telope.tigris.org
>>>>>>> For additional commands, e-mail: users-help at antelope dot tigris dot org
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --------------------​--------------------​--------------------​---------
>>>>>> To unsubscribe, e-mail: users-unsubscribe@an​telope.tigris.org
>>>>>> For additional commands, e-mail: users-help at antelope dot tigris dot org
>>>>>>
>>>>>
>>>>> --------------------​--------------------​--------------------​---------
>>>>> To unsubscribe, e-mail: users-unsubscribe@an​telope.tigris.org
>>>>> For additional commands, e-mail: users-help at antelope dot tigris dot org
>>>>>
>>>>>
>>>>
>>>> --------------------​--------------------​--------------------​---------
>>>> To unsubscribe, e-mail: users-unsubscribe@an​telope.tigris.org
>>>> For additional commands, e-mail: users-help at antelope dot tigris dot org
>>>>
>>>
>>> --------------------​--------------------​--------------------​---------
>>> To unsubscribe, e-mail: users-unsubscribe@an​telope.tigris.org
>>> For additional commands, e-mail: users-help at antelope dot tigris dot org
>>>
>>
>> --------------------​--------------------​--------------------​---------
>> To unsubscribe, e-mail: users-unsubscribe@an​telope.tigris.org
>> For additional commands, e-mail: users-help at antelope dot tigris dot org
>>
>>
>
> --------------------​--------------------​--------------------​---------
> To unsubscribe, e-mail: users-unsubscribe@an​telope.tigris.org
> For additional commands, e-mail: users-help at antelope dot tigris dot org
>

--------------------​--------------------​--------------------​---------
To unsubscribe, e-mail: users-unsubscribe@an​telope.tigris.org
For additional commands, e-mail: users-help at antelope dot tigris dot org

« Previous message in topic | 9 of 9 | Next message in topic »

Messages

Show all messages in topic

Problems with loading a build script Justin Casp <jcasp at bellsouth dot net> Justin Casp <jcasp at bellsouth dot net> 2004-04-09 08:53:25 PDT
     Re: Problems with loading a build script Dale Anson <danson at germane-software dot com> Dale Anson <danson at germane-software dot com> 2004-04-09 11:14:35 PDT
         Re: Problems with loading a build script Justin Casp <jcasp at bellsouth dot net> Justin Casp <jcasp at bellsouth dot net> 2004-04-09 13:29:25 PDT
             Re: Problems with loading a build script Dale Anson <danson at germane-software dot com> Dale Anson <danson at germane-software dot com> 2004-04-09 13:57:28 PDT
                 Re: Problems with loading a build script Justin Casp <jcasp at bellsouth dot net> Justin Casp <jcasp at bellsouth dot net> 2004-04-09 14:06:07 PDT
                     Re: Problems with loading a build script Dale Anson <danson at germane-software dot com> Dale Anson <danson at germane-software dot com> 2004-04-09 16:25:18 PDT
                         Re: Problems with loading a build script Dale Anson <danson at germane-software dot com> Dale Anson <danson at germane-software dot com> 2004-04-09 22:43:43 PDT
                             Re: Problems with loading a build script Justin Casp <jcasp at bellsouth dot net> Justin Casp <jcasp at bellsouth dot net> 2004-04-12 07:41:43 PDT
                                 Re: Problems with loading a build script Dale Anson <danson at germane-software dot com> Dale Anson <danson at germane-software dot com> 2004-04-12 13:31:53 PDT
Messages per page: